Skip to main content
Motorcycle Model Loading...
Make is required!
Elite One Armed Rear - BMW R1250 models

Elite One Armed Rear - BMW R1250 models

0 reviews Write a review

$326.95


  • Product Code: F0109-450
  • Availability: In Stock Ships within 1-2 business days
  • Instructions: F0099-000.pdf

Available Options

Handle Extension
Handle Extension required!
Wall Mount, OAR/FHR (Storage)
Wall Mount, OAR/FHR (Storage) required!
Qty required!

Our new Elite One Armed Rear Stand was designed with features that are very helpful to lift the R1250 model BMW's due to the heavy weight of that bike. The design features a lower cross tube for increased tire clearance as well as an overall lower height for more leverage. It also features a support brace for increased rigidity, which helps maintain the slight positive angle found in the stand(to keep the bike inclined towards the stand). This stand could be used on other motorcycles with single sided swingarms but the primary benefit would be increased leverage and rigidity. Sold complete with pin to fit the BMW single sided hub found on the R1250, R1200, K1300, and R9T models, but pins are interchangeable to fit other bikes.

NOTE: While this Pit Bull stand is capable of lifting many bikes from both sides, it is only intended for use on the drive side of the BMWs using our Elite One Armed Rear. If you own more than one single sided swingarm bike, you can still use this stand on both sides of that bike if Pit Bull pins are available for both sides of that motorcycle.

EXTENDED HANDLE OPTION: The R1250 is a heavy bike. Pit Bull strongly recommends the handle extension option for this bike. For reference, George is 230 lbs. and can lift the bike without the extension. Kelly is 180 lbs. and lifts weights regularly and can just barely lift the bike without the extension. By our estimation, 80% of our customers are likely to need the handle extension to lift the R1250GSA. We do not want to "force" this option on anyone, but please consider it if you have back issues are an average sized human.

Left Pin Diameter: 2.114"-2.116" (not to be shared with customers, only confirm fitment information). BMWs built before 2013 should probably all use the black sleeve. Everything after '13 should use the red sleeve (with the possible exclusion of the early R9T models because they were using old parts on the early ones)

Handle Length: 26.75"


Center of pin, height from ground: 15.5"

Write a review

Warning: Review Name must be between 3 and 25 characters!
Warning: Please select a review rating!
Warning: Review Text must be between 25 and 1000 characters!
Note: HTML is not translated!

Related Products

Pit Bull's Retainer for Single-Sided Swingarm Stands as well as our Forward Handle Rear Stands. T..
$49.95
Pit Bull's Retainer for Single-Sided Swingarm Stands as well as our Forward Handle Rear Stands. T..
$38.95
Back to top