Skip to main content
Motorcycle Model Loading...
Make is required!

Pit Bull June 2017 Update

Posted by George H. 31.08.23

Pit Bull Hybrid Dual Lift Motorcycle Front StandIt's been a busy Spring over here!  We just uploaded a video demonstrating our Hybrid One Armed Rear Stand on the Ducati XDiavel (see video here)

We've been working with a customer on a new Trailer Restraint Pin Kit for the 2017 Yamaha FZ-09 due to the addition of that new rear fender/tag bracket that's mounted to the axle.  Prototypes were sent out and fitment has been confirmed, so that kit is now available here: Complete System or here if you just need pins: Pins Only 

A customer has reported that the 2018 Triumph 765 Street Triple will use the #26S pin so that's worth noting if you plan to purchase that bike.

The front stand pin fitment for the Kawasaki Ninja 300 ('15-'17) was updated to the #37 pin (Std Pin will work if the horn is removed).

We also test-fitted the new Suzuki GSX250R and found that the Standard Pin is a good fit for the Hybrid Headlift and it will work with our Spooled Rear Stands and 8mm spools.

We looked at the Ducati Scrambler Desert Sled and determined that it will not use our Scrambler Rear Stand, but instead should be fine with the Standard Rear Stand.

We decided that we will not make it to Barber Vintage Fest this year, but plan to return next year.  We'll be at AIM Expo in Columbus in September, then New York in December for the IMS, and then next February we'll be at the Chicago IMS.  

That's about all for now.  Give us a call or drop us an email if you have any questions at any time!



Back to top