The Spooled Rear Stand lifts spool-equipped bikes. It is
width adjustable to fit virtually all spool-equipped
sportbikes. The Pit Bull rear motorcycle stand was designed
as a modular platform which allows SS, Standard, 999, and GP
top supports to be used interchangeably. Sold complete
with top supports. Spools sold separately.
NOTE: Use a Fully Adjustable Spooled Rear for a 2nd gen Busa as well as Ninja 1000 or ZX14R models with stock fender as that stand will clear the low hanging rear fender on these bikes. If you have a fender eliminator installed on those bikes, you may use this motorcycle stand on any of those bikes.
As of November 2022, all of our rear stands come standard with the 16" removable handle.
If you're not sure which stand is right for your bike, check out our bike specific navigation, view all motorcycle stands or simply contact us and ask! Pit Bull stands are known for our distinctive gold and red finish and are not available in other colors.
Can I lift the bike while it's on the kick stand? No. The bike must be held upright with one hand while using the stand with the other hand.
Is it okay to strap my bike down in the trailer while the bike is on the stand? No. The stand was designed to handle well over the weight of any motorcycle but it was not designed to have the additional forces associated with strapping down and additional shock forces that would happen during transport in mind. There is a strong possibility for failure and/or weakening of the stand.
Handle Length: Fixed handle: 12", Removable handle: 16"
Width Adjustability: 10.5"-14.75", (Narrow/Vintage Version: 8"-11.25")
Height from ground, supports: 13-1/8"
NOTE: Stand will not work on '15+ Versys 650 or Vulcan S models with stock fender. Use the F0043-000, Forward Handle Spooled Rear in this case.