Our Hybrid Headlift Stand will lift your motorcycle from the hole in the lower triple tree(steering stem), allowing you to remove the tire, remove/service the forks, or just store the bike with no load on the suspension. The Hybrid Headlift Front features 7 indexable height adjustments, which is very desirable when removing the forks on your motorcycle.
You will have several options below when adding this item to your cart. The most important option is the front pin. You'll need to review our pin fitting chart or information in our bike-specific categories to determine which pin is right for your motorcycle and year model.
There are welded-on "bungs" on the upper part of this stand that you can attach our caliper holders to if you'd like to have a place to mount your calipers and caliper bolts while working on the front of the bike.
You'll also be asked to decide whether you want an axle holder. The Axle Holder is exactly what it sounds like: something to hold your axle when you remove it from the motorcycle. It is not necessary, but a nice option if you like that concept.
The Wall Mount is another item that is exactly what it sounds like: something you can use to hang your stand up on the wall of your shop or trailer. The "Shop Kit" comes with the Front Stand Retainer only, which is great for a shop/garage. The "Transport Kit" comes with an adjustable bungee cord and d-rings to mount your stand on the wall of the trailer.
The Hybrid Headlift is based upon a modular design and can be easily converted to lift from the forks instead of the lower triple tree with the addition of hybrid swivels (related products below).
The Hybrid Headlift Front Stand comes standard with a 16" removable handle you can choose for maximum leverage and of course the convenience of not having the handle be a trip hazard when the bike is left on the stand. Pit Bull stands are known for our distinctive gold and red finish and are not available in other colors.
NOTE: Some bikes require brake line removal or other special considerations. See our pin fitting charts for bike-specific notes.
HEIGHT ADJUSTMENT: 30.75" - 32.25" (not including the pin since pins vary in length and shoulder position)
The Hybrid Headlift part number: F0100-000 was used for the fixed handle version of this stand which was discontinued in late 2022. The F0100A-000 part number is the new part number which includes the removable handle.